Wireless SSID not Showing up
I just bought a new Modem Router (Linksys WAG320N) and set it up using Cisco's included wizard. However, when trying to access my wifi network from my smartphone, I don't see it appear in the available networks.
Of course SSID broadcasting is ON and I gave it an custom name (unique in my neighborhood). On the modem, the "wireless" LED is lit (green), so it seems OK.
I tried to restore the modem configuration to its factory default settings (and then reconfigure it manually), but this hasn't solved my problem.
I tested it with two different devices (one Android smartphone, one old iPod Touch) with the same results on both.
I also tried to enter the network information manually on my Android device, but then it just says that this network is not in range.
Any help or advice would be appreciated. ^^
Edit: as requested, my settings:
Basic wireless settings:
Radio Band: 2.4GHz Wireless
Network Mode: B/G/N-Mixed
Channel Bandwidth: Wide - 40 MHz Channel
Wide Channel: 9 - 2.452GHz
Standard Channel: 11 - 2.462GHz
SSID Broadcast: Enable
Advanced Wireless Settings
AP Isolation: Disable
Authentication Type: Auto
Basic Rate: Default
Transmission Rate: Auto
N Transmission Rate: Auto
CTS Protection Mode: Disable
Beacon Interval: 100
You might also like
Wireless-N Router AP Repeater Client Bridge IEEE 802.11 b/g/n 300Mbps EU Plug Mini